Garaventa Genesis Enclosure

The Genesis Enclosure is lift with a factory supplied code compliant enclosure. The Genesis Vertical lift can provide access for lifting heights up to 14 feet. A variance is required for travel over 12 feet in some states. This model can make up to three stops and is available in a variety of finishes. The Genesis Enclosure allows for extensive customization with a variety of finishes and configurations to suit your building requirements.

Please note that there are some restrictions for outdoor applications due to location and weather conditions. Please note that increased maintenance and service repair frequencies will be required for exterior installations. Please contact Garaventa New England for more information and assistance.

Garaventa Genesis Enclosure - Standard Features

Listed below are some of the many standard features of this product. For more detailed information please contact our sales team or refer to the Genesis Planning Guide.

Drive Systems - There are two standard drive systems available for the Genesis Enclosure model.

Leadscrew Drive - The economical Leadscrew Drive System (2 HP motor) travels at 10 ft. per minute and requires 120 VAC single phase on a dedicated 20 amp circuit. The Leadscrew Drive System is available in six different lifting heights, up to a maximum of 147".

Hydraulic Drive - The Hydraulic Drive (3 HP motor) is powered by continuous mains power with an auxiliary power system. It is a quieter drive system and travels at 17 feet per minute. This system requires 120 VAC single phase on a dedicated 15 amp circuit. The Hydraulic Drive System is available in 7 different lifting heights, up to a maximum of 171" (variances required in some states for lifting heights over 12 feet).

Rated Load - 750lbs. capacity

Platform Features

• Platform Controls - rocker style directional switches with an emergency stop button. Keyed operation is required in some states.
• Grab Rail - used by the passenger when entering or exiting the lift
• Standard Platform Size - 37 1/4" x 54"
• Manual Lowering -
  • Leadscrew - a handwheel is used to lower the lift
  • Hydraulic Model - to lower the lift a knob on the side of the mast can be pulled to open the hydraulic valve and lower the platform.
• Entry/Exit Configuration - straight through entry/exit configuration

Call Stations - Rocker style switches mounted in the frame of the gate. Keyed operation is required in some states.

Doors and Gates - The Genesis Enclosure model requires a door at the lower landing and allows for a choice of a door or gate at the upper landing. The doors are made of anodized aluminum extrusions with Satin Grey steel panels. The doors and gates are equipped with a "D" handle and use mechanical interlocks at each landing.

Standard Finishes - The standard finish for the Genesis Enclosure model is anodized aluminum extrusion with Satin Grey steel panels.

Garaventa Genesis Enclosure - Optional Features

Listed below are some of the many optional features available for this product. For more detailed information please contact our sales team or refer to the Genesis Planning Guide.

Drive System - The Genesis Enclosure can be supplied with a 3 HP Hydraulic Drive with full time battery operation.

Platform Features

• Platform Controls - illuminated and tactile constant pressure style buttons and keyed operation
• Optional Platform Sizes -
  • 37 1/4" x 60"
  • 43 1/4" x 60"
  • Custom platform sizes are also available
• Entry/Exit Configuration -
  • 90° Entry/Exit
  • Same/Side Entry Exit
• Emergency Lowering -
  • Leadscrew - battery powered
  • Hydraulic - auxiliary power system

Call Stations

• Illuminated and tactile constant pressure style buttons
• Keyed Operation
• Call Stations can be wall mounted (flush or surface)

Doors and Gates

• Anodized Aluminum Frames with Plexiglas panels (bronze or clear) or with laminated safety glass.
• Steel door panels can be finished with a variety of RAL or custom matched colors. Note: regardless of finish the Enclosure model is supplied with a steel panel kickplate.
• Powered Interlocks
• Time delay for Powered Interlocks
• Power Door Operators
• Door required at the mid-landing of a three stop unit

RAL Colors - As an option, the steel panels and aluminum extrusions can be painted from the large selection of RAL colors (Custom RAL Color Chart (pdf)). Alternatively, the Genesis Enclosure can be supplied with 5mm (3/16") bronze tinted or clear Plexiglas panels, or 6mm (1/4") laminated glass panels.

Custom Finishes - As an option, Garaventa offers custom color matching. Garaventa also offers Graphic Imaging and Exotic Finishes. Exotic finishes include brass and stainless effects created with special paint. Textured and speckled paint can be applied to the panels and extrusions. The panels can also be supplied with wood finishes, Formica, architectural metals or any material not exceeding 1/2" in thickness.

Outdoor Applications - When located outdoors, the Genesis is specially prepared to ensure durability and reliable performance. Please contact our sales team regarding outdoor applications as there may be applicable code restrictions.

Garaventa Genesis Enclosure - Miscellaneous Optional Features

Consult the Genesis Planning Guide for more information about these features.

• Autodialer Phone (ADA compliant)
• Plexiglas Dome
• Sloped Roof
• Fan and Ventilation System
• Stationary Ramp
• Fold Down Seat
• Enclosure Infill Panels
• Outdoor Preparation
• Electrical Disconnect
• Pit Switch
• Arrival Gong and Digital Floor Display